PDA

View Full Version : Quick Computer question


fatmanforlife99
11-21-2007, 12:25 AM
I was wondering can you just connect two computers with a usb cable and transfer files?

mguiddy
11-21-2007, 12:59 AM
Short answer... Yes.
Long answer (http://www.hardwaresecrets.com/article/248)

fatmanforlife99
11-21-2007, 07:03 AM
Thanks for quick response, but i would have to drop 40 bucks on a damn bridged cable, well what about over a network, would that work?

MrJymm
11-21-2007, 08:55 AM
Probably easier/cheaper via ethernet. Either connect both PCs to a router or switch, or you can connect the PCs directly if you use a cross-over cable, which is the Cat5 equivalent of a bridged USB cable.

InuFaye
11-21-2007, 11:16 AM
easiest solution........buy a thumb drive.
/thread.

necrojustice
11-21-2007, 11:21 AM
easiest solution........buy a thumb drive.
/thread.

Ding.

level1online
11-21-2007, 11:47 AM
copied from slickdeals.net:

Circuit City (http://slickdeals.net/?pno=10769&lno=1&afsrc=1) has 500GB Western Digital MyBook Essential Edition USB2.0 external hard drive for $90 with no rebates and free shipping.

mguiddy
11-21-2007, 01:21 PM
Thanks for quick response, but i would have to drop 40 bucks on a damn bridged cable, well what about over a network, would that work?

Short answer... Yes
Long answer (http://www.conniq.com/WinXPNetworking_Ethernet_direct_connection.htm)

Yes you'll need a crossover cable, but you can make (http://www.lanshack.com/make-cat5e.aspx) your own out of a regular cable. But since you probably don't have a crimper, I'd strip a part of the cable and snip and twist the wires that needed to be crossed.

fatmanforlife99
11-21-2007, 02:54 PM
The flash drive is a genius idea, but i am moving around 20-30 GBs of data. I will try the crossover cable tonight.

RAMSTORIA
11-21-2007, 03:16 PM
youre not on a home network? why not just set up file sharing.

mguiddy
11-21-2007, 03:19 PM
Also, if both computers have firewire you can use that. It doesn't require a special cable and is literally plug and play.

seen
11-21-2007, 03:58 PM
I was wondering can you just connect two computers with a usb cable and transfer files?

You could get a cross overcable at your pc store, and connect the two via ethernet; you could do this with a hub and 2 ethernet cables if you dont have a cross over.

fatmanforlife99
11-21-2007, 03:59 PM
thats what i just did so what do i do now?

mguiddy
11-21-2007, 04:23 PM
thats what i just did so what do i do now?

Read through the guide I posted...


Long answer (http://www.conniq.com/WinXPNetworking_Ethernet_direct_connection.htm)

^^^^
there.

I don't use windows, so I can't tell you what to do from experience, but it looks like a fairly thorough guide.

fatmanforlife99
11-22-2007, 03:15 AM
well thanks to you all, i just connected it via the router and it works thanks again