Pelican Blade Controller - Need Pinout

I have a couple of Pelican Blade Controllers to repair. I looked inside the connectors (Ones that plug into the console) and the wires were disconnected from their solder points (Yes, they are soldered onto the connector).

Bottom Line: I need someone to open up a connector on a working Pelican Blade Controller and tell me where each color of wire goes. Possibly take pictures too?

In order to fix it you need an appropriate screwdriver to remove the screw.
Found wire colors and differentiate every wire seeing the controller type and find out the right one. Then couple of slight whacks needs to open with help of hammer and fix any one controller of 3.

In order to fix it you need an appropriate screwdriver to remove the screw.
Found wire colors and differentiate every wire seeing the controller type and find out the right one. Then couple of slight whacks needs to open with help of hammer and fix any one controller of 3.