The Death of Chinese Food OTT

Status
Not open for further replies.
[quote name='PlumeNoir']Did CAG go down for anyone else...?[/quote]

Why must you always leave HUGE openings?

Yes. CAG went down, but it went down on me first. You're in for sloppy seconds, buddy.
 
Holy fucking shit, the people that browse this site are idiots. Thank god CAG isn't a chatroom.

Now I know why I stick to the OT forum.
 
Demolition Man broke the internuts, again.

If any of you guys got Fox Sports, PRIDE fighting is on for an hour right now and its got two old chuck liddell, wanderlei silva fights. :D
 
[quote name='corrosivefrost']Why must you always leave HUGE openings?

Yes. CAG went down, but it went down on me first. You're in for sloppy seconds, buddy.
[/quote]

Speaking of huge openings, you should see what the sloppy thirds guys has to deal with...
 
[quote name='Pancake Rabbit']Lawlz at discussion about QotSA on the previous page. 3's & 7's = lawl.[/quote]

I'm not too into hip-hop, so I don't know if I'll be downloading their album.
 
[quote name='TFN']I'm not too into hip-hop, so I don't know if I'll be downloading their album.[/QUOTE]
You just hate them because they're black.
 
[quote name='TFN']I'm not too into hip-hop, so I don't know if I'll be downloading their album.[/QUOTE]

Is this nigga serious?

QotSA is indy death-core techno

get a fucking clue
 
[quote name='SneakyPenguin']New school OTTers seem to have an unhealthy obsession with QotSA.[/QUOTE]

Cause QotSA is where it's at.
 
[quote name='SneakyPenguin']New school OTTers seem to have an unhealthy obsession with QotSA.[/QUOTE]
I haven't listened to them for ages. Since before their horrendous show at ACL, I think.

I think they were just another phase for me, kinda like SoaD. I'm not going to stop listening to them entirely like I did with SoaD, but I'm not going to listen to them nearly as much as I used to.
 
[quote name='Pancake Rabbit']Cause QotSA is where it's at.[/quote]

Eh, what little I heard of them was ok, but it never really made me want to look at any of their other output.
 
Whoa, cool. The electronic ballot machines in Switzerland are going to be secured using quantum cryptography.

That's pretty fucking awesome.

[quote name='Pancake Rabbit']The difference between SoaD and QotSA is that SoaD is trash.[/QUOTE]I used to listen to them like Brak listens to the Cardigans back in my Sophmore year.
Glad I got over that...
 
That's pretty awesome. Electronic polling is the way of the future, though we still do most of ours by hand.
 
Why don't women wear watches?
There's a clock on the stove.

Why do women have short feet?
So they can stand closer to the stove.

Why don't women need drivers licenses?
There is no road between the bedroom and the kitchen.

Why couldn't Hellen Keller drive?
Because she was a woman.

What if God's a woman? Not only am I going to hell, I'll never know why.
 
[quote name='TFN']Wish I had good music to listen to, everything I like is trash. :[[/QUOTE]

You should listen to some Young H-O.
 
[quote name='Rocko']What's up with all the lame jokes about women from Punk Raven lately?[/QUOTE]
Q: Why did the woman cross the road?
A: To leave baby Punk_Raven in the dumpster across the street.
 
[quote name='SneakyPenguin']Does anyone know the trade-in value for a old PSP? I'm looking to get one of the new slim ones.[/quote]

I think you just missed GS adding 20 $ to your trade-in of a console that ended today.. I think, I'm not sure.

I think its like 50 though, or 45.
 
[quote name='TFN']I think you just missed GS adding 20 $ to your trade-in of a console that ended today.. I think, I'm not sure.

I think its like 50 though, or 45.[/quote]

Yikes, that sucks.

Maybe I'd have better luck here on the forums.
 
[quote name='dcfox']Law & Order?[/quote]

No...I think this show is called Shark and the one I saw before this was Cold Case. That Cold Case chick looks like a corpse.
 
[quote name='Mike23']That's pretty awesome. Electronic polling is the way of the future, though we still do most of ours by hand.[/QUOTE]The Economist article that I read about it in kept making snide references to our own election. :lol:
 
nelson.gif
nelson-muntz.gif

Ha-ha!
 
I'm a crafty mother fucker. I have an Intec PS2 aluminum case, similar to this one:

131428g8660ym6.jpg


It's neat, but you can't really put anything in it except a PS2, because of the dividers. Duh, right? Well, I wanted to use it to store other crap.

I tugged on the dividers and found they weren't fastened into the box structurally, so I pulled them out and gutted all the foam, padding, and lining from the bottom portion. Turns out, the box is actually wood under the aluminum. Sandpapered down the inside to get rid of the remnants of the foam and glue residue. Vacuumed it out and wiped it down.

Measured the box and made some paper templates of the bottom and sides, allowing for the hinge arm, etc. Used the templates to cut a few sheets of black craft foam (looks like thin neoprene) and relined the box without the dividers.

Looks schweet, the case was free, the refurb cost a grand total of $2.50 for the three sheets of craft foam, and it took me about 3 hours, all told.
 
Shows up fine for me. :whistle2:k

I just realized Serj's new album comes out in two days. Seems it's already on the web but I'd like to support him. But only if Target carries it. :lol:
 
[quote name='WhipSmartBanky']I'm a crafty mother fucker. I have an Intec PS2 aluminum case, similar to this one:

131428g8660ym6.jpg


It's neat, but you can't really put anything in it except a PS2, because of the dividers. Duh, right? Well, I wanted to use it to store other crap.

I tugged on the dividers and found they weren't fastened into the box structurally, so I pulled them out and gutted all the foam, padding, and lining from the bottom portion. Turns out, the box is actually wood under the aluminum. Sandpapered down the inside to get rid of the remnants of the foam and glue residue. Vacuumed it out and wiped it down.

Measured the box and made some paper templates of the bottom and sides, allowing for the hinge arm, etc. Used the templates to cut a few sheets of black craft foam (looks like thin neoprene) and relined the box without the dividers.

Looks schweet, the case was free, the refurb cost a grand total of $2.50 for the three sheets of craft foam, and it took me about 3 hours, all told.[/QUOTE]
You're the new DIY man.
 
[quote name='WhipSmartBanky']I'm a crafty mother fucker. I have an Intec PS2 aluminum case, similar to this one:

131428g8660ym6.jpg


It's neat, but you can't really put anything in it except a PS2, because of the dividers. Duh, right? Well, I wanted to use it to store other crap.

I tugged on the dividers and found they weren't fastened into the box structurally, so I pulled them out and gutted all the foam, padding, and lining from the bottom portion. Turns out, the box is actually wood under the aluminum. Sandpapered down the inside to get rid of the remnants of the foam and glue residue. Vacuumed it out and wiped it down.

Measured the box and made some paper templates of the bottom and sides, allowing for the hinge arm, etc. Used the templates to cut a few sheets of black craft foam (looks like thin neoprene) and relined the box without the dividers.

Looks schweet, the case was free, the refurb cost a grand total of $2.50 for the three sheets of craft foam, and it took me about 3 hours, all told.[/quote]

Pics or gtfo.
 
[quote name='WhipSmartBanky']Banky the Builder, bitches.[/QUOTE]
Now you all you need is a new avatar to reflect it.
 
Status
Not open for further replies.
bread's done
Back
Top