Jump to content


- - - - -

Gamecube to Game Boy Micro Cable - Instructions in here


Poll: Would you purchase a Gamecube->Micro/GBA Link Cable at $25 shipped? (344 member(s) have cast votes)

Would you purchase a Gamecube->Micro/GBA Link Cable at $25 shipped?

You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.
Vote Guests cannot vote

#1 Troz1820   Pinball Addict CAGiversary!   457 Posts   Joined 16.5 Years Ago  

Posted 30 December 2005 - 08:47 PM

Cables and service not currently available. Sorry.

Posted Image

Frustrated with the lack of Gamecube connectivity for the GameBoy Micro? This thread will show you how to restore that functionality. No modifications on the GameBoy Micro itself are necessary, only of the cable to link the Micro and the Gamecube. For this you will need:

1) An Official Nintendo Game Boy Micro Game Link Cable.
2) Any Gameboy Advance to Gamecube Link Cable. The directions below show how to use the following link cables:

- Official Nintendo Gamecube to Game Boy Advance Connector Cable
- Nyko CubeLink cable (No longer available)
- MadCatz SystemLink cable (For both GCN & GBA connectivity via the GBM)
3) Soldering skills


Cable Service Information

I offer a cable building service if you do not feel you have the soldering skills necessary to build a cable. Unfortunately I cannot supply the cables myself. For the service you must send me the official Nintendo Gameboy Micro Link Cable and any GC->GBA Link Cable. I charge $20 for the service, which includes return shipping. The final cable will have the electronics enclosed in a small project box, the same box you can see in the photos here. I am sorry but I cannot source the cables for international orders anymore. Send me a Private Message if you are interested.


Official Nintendo Gamecube to Game Boy Advance Connector Cable Directions
(My preferred method)


First step is to cut the GameBoy Micro Link Cable next to the connector box, strip the shielding, and strip/tin the wires. Only the RED, BLUE, and ORANGE wires are necessary, along with the ground shield. You should be left with something like this:
Posted Image
Please note that I've only stripped the wires a tiny bit. You'll see why in the next photo.

Now, solder the wires onto the GC->GBA cables as shown, taking great care not to short any pins together. When I do these cables, I connect the ground shield to the left "post" on the circuitboard, then bridge it to pin 6 with some solder as you can see in the photo.
Posted Image

After you've finished this, you can try to stuff it back into the GC connector housing. If you do, be sure to cover your work with electrical tape and provide some strain relief on the cable. I end up using a small project box to enclose the electronics.


Nyko CubeLink Directions
Posted Image


I don't have any fancy pictures for this method but it should be self-explanatory. The completed cable is shown above.

First, cut the GBA end from the Nyko cable and cut one of the two Micro cables at the central "hub". Strip the wires so you can wrap them and make a nice solid connection. The wires link like this:

Nyko Cable -> Micro Cable
Black -> Wire shielding
Orange -> Green
Brown -> Brown
Green -> Orange
Blue -> Red
White -> Blue

Wrap everything up with electrical tape making sure that none of the wires touch another, or use heat-shrink tubing. I wrapped each individual wire with electrical tape and then carefully placed all of them in the shielding that I grabbed from the Nyko cable. I used small zip ties on the cables to decrease the stress on the solder joints in case the cable is pulled. Everything is contained in the shield on the right.

It's been a very long time since I've come across this cable. It's possible that only the RED, BLUE, ORANGE, and ground shielding wires are needed from the GameBoy Micro Link Cable. If I ever run into one of these again, I'll test it and post the results


MadCatz System Link
Posted Image

This method is very similar to using the Official Nintendo GBA->GC cable except it uses more wires to provide the additional GBA connectivity.

The rest will be coming soon...



Old method for the Official Nintendo Cable

Spoiler


Thanks to UncleBob for pushing me to start this and CheapyD for locating supplies for the first batch of cables back when I started this.

Edited by Troz1820, 04 September 2009 - 03:02 PM.
Cables are sold out


#17 hooo   CAG Veteran CAG Veteran   18 Posts   Joined 16.4 Years Ago  

Posted 11 January 2006 - 12:43 AM

It's cool that you took the time to make the link cable, but does the Game Boy micro Converter Connector also available on Nintendo's website not work with a GC/GBA link cable to get the same job done for cheaper and without any soldering? From the pics, it looks like you patched the link cable directly into the micro cable so if that works, I'd guess the adapter would too. Anyone tried it?

#24 erehwon   CAGiversary! CAGiversary!   3142 Posts   Joined 17.7 Years Ago  

Posted 11 January 2006 - 06:04 PM

That's pretty cool. You should try and get it posted on GameSX.com along with all the other great mods there. I'm sure plenty of other people would love to try this.